IOTWORKSHOP SerialPort Pro-EP20

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Embedded Device Networking > IOTWORKSHOP SerialPort Pro-EP20

IOTWORKSHOP SerialPort Pro-EP20

Embedded Linux Networking Server

IOTWORKSHOP SerialPort Pro-EP20
5341_16963.png
5341_16964.png
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • MIPS MCU with 16MB Flash and 32MB SRAM
  • Use Linux Operation System
  • Support Serial To 10/100M Ethernet Conversion,
  • Serial Speed Upto 460800 bps
  • Support 10/100M Ethernet Auto-Negotiation
  • Support Easy Configuration through a WebInterface
  • Support Security Protocol such as SSL/AES/DES3
  • Support Web OTA Wireless Upgrade
  • Single +3.3V Power Supply
  • Size: 50 x 23x 11 mm(L x W x H)
  • CE Certificated
The SerialPort Pro-EP20 unit is a complete solution for adding network connectivity to any device with a serial port connection. Packaged into an RJ45 connector, this powerful device boasts a 10/100BASE-T Ethernet connection, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack and standards-based (AES) encryption.

The SerialPort Pro-EP20 uses highly integrated hardware and software platform, optimised for real world applications such as industrial control, smart grid and remote control. By simply adding the SerialPort Pro-EP20 unit to a product design, device manufacturers can reduce their design cycle and time-to-market with minimal impact and risk.

The SerialPort Pro-EP20 integrates all Serial-to-Ethernet functionality inside a low-profile (50mm x 23mm x 11mm) RJ45 package that can be easily be mounted on to a PCB without any changes to the original design.

The SerialPort Pro-EP20 also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.
The SerialPort Pro-EP20 meets EMC Class B security level and surpasses the certification test for all countries.

Development kit is available
ProdGrafik
System Information
Processor/Frequency MIPS/320MHz
Flash/SDRAM 16MB/32MB
Operating System Linux
Ethernet
Port Number 1 RJ45 with LED
Interface Standard 10/100 Base-T Auto-Negotiation
Protection 2KV Isolation
Network Transformer Integrated
Network Protocol IP,TCP,UDP,DHCP,DNS,HTTP Server/Client,ARP, BOOTP, AutoIP, ICMP,Web socket, Telnet, FTP,TFTP, uPNP, NTP, SNMP,Modbus TCP
Security Protocol SSL v3(2048)、 AES 128Bit、3DES、 SHA-1、MD5、Base-64、RSA、ECC
IPV6 Support Support
Serial
Port Number 1 + 1 debug
Interface Standard 3.3V TTL: 2 wire(TX,RX)
Data Bits 7,8
Stop Bit 1,2
Check Bit None,Even,Odd,Space,Mark
Baud Rate TTL: 600 bps~460800bps
Flow Control No Flow control Hardware RTS/CTS、DSR/DTR Software Xon/ Xoffflow control
Software
Web Pages Http Web Configuration Customization of HTTP Web Pages
Log Remote Realtime Log
Configuration Web CLI XML import Telnet IOTManager PC Software
PC Config Tools IOTManager PC Software
SDK For Dev. Support
Basic Parameter
Size 50x 23x 11mm
Operating Temp. -45 ~ 70°C
Storage Temp. -45 ~ 105°C, 5 ~ 95% RH(no condensation)
Input Voltage 3.3V
Working Current ~200mA
Power <700mW
Certificate CE, FCC, RoHS
Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.