Advantech BB-WSD2MA2
Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, M12 Connector
- Ultra low power 802.15.4e SmartMesh IP technology
- Communicates with Spectre Network Gateway via highly scalable and reliable wireless mesh networks
- Connect to industry standard analog sensors
- Wzzard app lets you read or configure the nodes using Android tablets and smart phones
- Rugged, IP66-rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Class 1 DIV 2 approved for hazardous locations
The Wzzard platform uses mesh networking and time-synchronized channel hopping to provide up to 99.999% connectivity, even in the most demanding RF environments. New nodes may be added at any time, and the SmartMesh IP network will dynamically self-configure as new nodes are added or removed. This is a function of the mesh network itself, and does not need to be controlled by the network gateway. s
SPECIFICATIONS
POWER
- Internal
(2) 3.6V 2400 mAH Lithium Thionyl Chloride AA batteries
Battery Life
Multiyear based on 1 min sensor sampling and reporting
Optional External Input Voltage
3.3 VDC +/- 5%
MECHANICAL
- Physical Connection
M12 Connector
1/2” (12.7 mm) Conduit, sensor interface cable included; 8 wire, 26 gage, 6 ft. (1.8 m)
Sensor Inputs
Analog Input (0 - 5 VDC, 0 – 20 mA, 4 – 20 mA)
Digital Input (0-48 VDC)
Digital Input Frequency 1-1K Hz (Accuracy + or – 1 Hz)
Digital Input Counter
Integrated Accelerometer 3 Axis
Integrated Temperature
Thermocouple J, K Type
Digital Output (0-30 VDC)
Optional External Antenna
RP-SMA, Omnidirectional, 3.8 dBi, 2.4 GHz
Dimensions 7.64 inches (194 mm)
Mounting
Magnetic mounting via internal magnet Pull force 4.7 lbs (2.13 kg)
(4) Mounting ears, M5 (#10)
Enclosure
IP66-rated, fiber reinforced polyester PBT
Weight
0.75 lbs (0.34 kg)
TECHNOLOGY
- Wireless
802.15.4e, SmartMesh IP
Protocols
MQTT-SN, MQTT, JSON
Bluetooth
Bluetooth 4.0 Low Energy (LE)
LED
Network Connectivity
ENVIRONMENTAL
- Installation
Indoor or outdoor
Operating Temperature
-40 to 80°C (-40 to 176°F)
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
WIRELESS SECURITY
- Device Authentication
128 bit AES-based encryption with multiple keys
Message integrity check (MIC)
Synchronized key changeovers
Customized key rotation
SENSOR INTERFACE SPECIFICATIONS
DIGITAL INPUTS
- Voltage range
0 – 48 VDC
V IL
0.97 V Maximum
V IH
1.8 V Minimum
Pull up current
32uA
Type
Sourcing (PNP)/Sinking (NPN) Software selectable input
Isolation
None
RATE/FREQUENCY INPUTS
- Frequency
Does a 1 second measurement at each measurement/publish interval
Digital Input Frequency 1-1K Hz (Accuracy + or – 1 Hz)
Uses the falling edge or rising edge based on the Invert Enabled setting
COUNTER INPUT
- Channels
Actively counts either the falling edge (Invert enabled) or rising edge (Invert disabled)
Can use a multiplier to convert to a unit type or count
2 selectable/shared with Digital inputs
Rolls over at 999999.9
ANALOG INPUTS
- Input ranges
0 - 5 VDC, 0 – 20 mA, 4 – 20 mA
Resolution
12 bit
Input load resistance
100 Mega ohm (0-5VDC), 250 ohm (0 - 20 ma)
Accuracy
Voltage: 0.10% of full scale reading, 0.20% max.
Current: 0.11% of full scale reading, 0.24% max.
THERMOCOUPLE INPUT
- Types Supported
J and K
Ranges Supported
Type J -210 to +1,200 °C
Type K -270 to +1,372 °C
Resolution
0.25 °C
Accuracy
Typical +/- 2 °C
+/- 6 °C over the temperature range of -40 to 80 °C
DIGITAL OUTPUTS
- Voltage range
0 - 30 VDC
Output Type
Open Drain
Output Current
Not to be less than 100ma
Protection
Current Limit Protection
Isolation
None
INTEGRATED SENSORS
TEMPERATURE | CONDITIONS | MIN | TYP | MAX | UNITS |
Offset | Temperature Offset Error @ 25 °C | +/- 0.25 | °C | ||
Slope Error | +/- 0.033 | °C/ °C | |||
3 AXIS ACCELEROMETER | |||||
Configurable measurement ranges | +/-2 g, resolution of 1 mg/LSB | ||||
+/-4 g | |||||
+/-8 g | |||||
Configurable output data rates | 12.5Hz, 5Hz, 50Hz, 100Hz, 200Hz, 400Hz |
SMARTMESH IP 802.15.4E RADIO SPECIFICATIONS
TEMPERATURE | CONDITIONS | MIN | TYP | MAX | UNITS |
Frequency Band | 2,400 | 2,4835 | GHz | ||
Number of Channels | 15 | ||||
Channel Separation | 5 | MHz | |||
Channel Clear Frequency | Where k = 11 to 25, as defined by IEEE 802.4.15 | 2405 + 5*(k-11) | MHz | ||
Modulation | IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) | ||||
Raw data rate | 250 | kbps | |||
Range | 25 °C, 50% RH, +2dBi Omni-Directional Antenna, Antenna 2 m above ground | ||||
Indoor | 100 | m | |||
Outdoor | 300 | m | |||
Receiver Sensitivity | Packet Data Error Rate (PER) = 1% | -93 | dBm | ||
Receiver Sensitivity | PER = 50% | -95 | dBm | ||
Output Power | Delivered to a 50 Ù load | 8 | dBm |
BLUETOOTH LE RADIO SPECIFICATIONS
NO. | CHARACTERISTICS | CONDITIONS | MIN | TYP | MAX | BT SPEC. | UNIT |
1 | Operation Frequency Range | 2402 | 2480 | MHz | |||
2 | Channel Spacing | 2 | MHz | ||||
3 | Output Power | Maximum setting, measured at single ended 50ohm. Minimum setting, measured at single ended 50ohm. | 4 -24 | dBm dBm | |||
4 | Sensitivity, High Gain Mode | High Gain Mode Standard Mode | -93.0 -92.5 | -70 -70 | dBm dBm |
THIONYL CHLORIDE LITHIUM BATTERIES (2 SUPPLIED WITH PRODUCT)
CHARACTERISTICS | CONDITIONS |
Temperature Range | -40 to 85°C |
Nominal Capacity | 2.4 Ah |
Nominal Voltage | 3.6 V |
Diameter | 14.5 mm |
Height | 50.5 mm |
APPROVALS AND CERTIFICATIONS
CE
EN55022 | CISPR (EN55022) Class A |
EN 61000-6-2:2005 | Generic immunity standard for residential, commercial and light industrial environments |
EN 61000-6-4:2006+A1:2011 | Emission standard for (heavy) industrial environments |
EN61000-4-2 | ESD +/- 8kV air, +/- 4kV contact |
EN61000-4-3 | RFI |
EN61000-4-4 | EFT |
EN61000-4-5 | Surge |
EN61000-4-6 | CI |
EN60255-21-1 | Vibration, 2g, 10-500Hz 0.3mm displacement |
EN60255-21-2 | Shock, 50g, 11ms half sine wave, 18 shocks |
ENVIRONMENTAL
- IEC 60068-2-6:2007
Vibration, 2g, 10-500 Hz,1.5mm displacement
IEC 60068-2-27:2008
Shock, 50g, 11ms half sine wave, 18 shocks
FCC/IC
- FCC Part 15 Class A
FCC - Part 15.247
Industry Canada - RSS210
SAFETY
- UL/CSA Class 1, Division 2 Group A, B, C, D
REGULATORY APPROVALS
- ROHS and WEEE Compliant
ORDERING INFORMATION | |
MODEL NUMBER | THERMOCOUPLE INPUT |
BB-WSD2CTJ | Wireless Mesh 802.15.4e, 2 Thermocouple J-type Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CTJ | Wireless Mesh 802.15.4e, 2 Thermocouple J-type Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
BB-WSD2CTK | Wireless Mesh 802.15.4e, 2 Thermocouple K-type Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CTK | Wireless Mesh 802.15.4e, 2 Thermocouple K-type Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
MODEL NUMBER | ACCELEROMETER |
BB-WSD2XV0 | Wireless Mesh 802.15.4e Integrated Accelerometer; External Antenna |
BB-WSD1XV0 | Wireless Mesh 802.15.4e Integrated Accelerometer; Internal Antenna |
MODEL NUMBER | ANALOG INPUT |
BB-WSD2MA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, M12 Connector |
BB-WSD1MA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; Internal Antenna, M12 Connector |
BB-WSD2CA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; External Antenna, Conduit Connector |
BB-WSD1CA2 | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output; Internal Antenna, Conduit Connector |
BB-WSD2CJA | Wireless Mesh 802.15.4e; 2 Analog Inputs, 1 Digital Output, 2 Thermocouple J-type Inputs; External Antenna, Conduit Connector |
BB-WSD2MA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; External Antenna, M12 Connector |
BB-WSD1MA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; Internal Antenna, M12 Connector |
BB-WSD2CA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; External Antenna, Conduit Connector |
BB-WSD1CA3 | Wireless Mesh 802.15.4e; 3 Analog Inputs; Internal Antenna, Conduit Connector |
MODEL NUMBER | DIGITAL INPUT |
BB-WSD2MD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; External Antenna, M12 Connector |
BB-WSD1MD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; Internal Antenna, M12 Connector |
BB-WSD2CD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; External Antenna, Conduit Connector |
BB-WSD1CD2 | Wireless Mesh 802.15.4e; 2 Digital Inputs, 2 Digital Outputs; Internal Antenna, Conduit Connector |
ACCESSORIES | |
PART NUMBER | DESCRIPTION |
ACH2-DBAT-DP003 | External Antenna, 2.4 GHz, 2 dBi, Dipole, RP-SMA, hinged, 3.8 dBi |
ACH2-AT-DP011 | Magnetic Mount Antenna, 2.4 GHz, 3.8 dBi |
WSCAC0-6 | Pigtail Cable 6 ft (1.8m) |
WSCAM12-6 | M12 Wiring harness cable, 8 pin, 6 ft (1.8 m) |
ZXTMT | Cable Gland/Conduit Kit |
Kunder, der kiggede på dette produkt, kiggede også på