Advantech BB-HESP4DR

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Protection Modules > Advantech BB-HESP4DR

Advantech BB-HESP4DR

Three Stage DIN Rail Surge Protector

Advantech BB-HESP4DR
4581_33062.png
4581_10040.png
4581_33063.jpg
4581_33064.jpg
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • Three stages of protection on every data line: Gas discharge tube, Series resistor, Transient voltage suppressor
  • Protected signal ground connection
  • Rugged terminal block connections
  • Dedicated chassis ground lug
  • Wide operating Temperature
  • NEMA TS2
Model BB-HESP4DR meets IEEE 1000-4-5: 1995 and IEEE C62.41-1991 recognized standards for premium surge protectors. It protects against lightning strikes, power surges, and other types of voltage disturbances with three stages of protection for each supported line: a gas discharge tube followed by a series resistor and finally a Transient Voltage Suppresser (TVS). Five RS-422/485 signals on terminal blocks are supported with a clamping voltage of 6.8 Volts.

The BB-HESP4DR is housed in a sturdy DIN rail mount case with a #10 grounding screw. In order to work properly, it is important to have a good connection between the #10 screw and a solid earth ground.
ProdGrafik

SERIAL TECHNOLOGY

    Connectors, line
    5 position terminal blocks

    Connectors, equipment
    5 position terminal blocks


SURGE SUPPRESSION

    Clamping Voltage- stage 1
    72 VDC, minimum
    108 VDC, maximum

    Series Resistance- stage 2
    2.7 Ohms

    Clamping Voltage
    - stage 3
    6.45 VDC, minimum
    7.14 VDC, maximum

    Clamping Time
    Less than 5 x10 -9 seconds

    Dimensions
    3.55 x 7.88 x 10.53 cm (1.4 x 3.1 x 4.2 in)

    Installation
    DIN rail mount

    Weight
    0.114 kg (4.02 oz)


ENVIRONMENTAL

    Operating Temperature
    -40 to 80°C (-40 to 176°F)

    Storage Temperature
    -40 to 85°C (-40 to 185°F)

    Operating Humidity
    0 to 95% Non-condensing


APPROVALS / CERTIFICATIONS - HESP4DR

    FCC Part 15, CISPR, EN 55022: 2010 + AC:2011 Class A Emissions
    CE, NEMA TS2
    EN 61000-6-1: 2007 Generic Standards for Residential, Commercial and Light-Industrial Environments
    EN 61000-4-5: 2006 Electrical Surges



Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.