Advantech BB-485DRCI
Triple Isolated RS-232 to RS-422/485 Converter
- Data rates up to 115.2 kbps
- Three-way 2,000V optical isolation (input, output, power)
- Wide operating temperature
- UL Class 1/Division 2
- Modbus ASCII/RTU compatible
- 10–48 VDC input power range
Model 485DRCi industrial-grade isolated serial converter changes RS-232 signals to RS-422 for increased range, or to RS-485 for increased range plus multi-drop capability.
Designed for rugged industrial use, the 485DRCi is UL approved and certified for operation in Class 1/Division 2 environments and also offers 2,000V 3-way optical isolation on input, output, and power lines. In addition to optical isolation, the unit has surge suppression on the RS-422/485 lines. This DIN rail mountable converter optically isolates and converts unbalanced, full or half-duplex, RS-232 signals to balanced RS-422/485 signals at baud rates up to 115.2 kbps. Configuration is made via a 12-position DIP switch on the bottom of the converter.
Featuring Automatic Send Data Control circuitry, the converter does not require special software control of handshake signals in RS-485 mode. Removable terminal blocks for power and RS-422/485 signals make wiring easy. It is powered by a supply voltage of 10 to 48 VDC which is isolated from all data and signal ground lines.
Designed for rugged industrial use, the 485DRCi is UL approved and certified for operation in Class 1/Division 2 environments and also offers 2,000V 3-way optical isolation on input, output, and power lines. In addition to optical isolation, the unit has surge suppression on the RS-422/485 lines. This DIN rail mountable converter optically isolates and converts unbalanced, full or half-duplex, RS-232 signals to balanced RS-422/485 signals at baud rates up to 115.2 kbps. Configuration is made via a 12-position DIP switch on the bottom of the converter.
Featuring Automatic Send Data Control circuitry, the converter does not require special software control of handshake signals in RS-485 mode. Removable terminal blocks for power and RS-422/485 signals make wiring easy. It is powered by a supply voltage of 10 to 48 VDC which is isolated from all data and signal ground lines.
Display
- LED Indicators
Communication and Power
General
- Communication Speed
Serial: From 1,200 to 115.2 k
Connector
RS-232: female DB9
RS-422/485: plug-in screw terminal
Humidity
0 ~ 95%, non-condensing
Interface
RS-232 to RS-422/485
Isolation Protection
2000 VDC
Temperature (Operating)
-40 ~ 80° C (-40 ~ 176° F)
Temperature (Storage)
-40~85°C (40~185 °F)
Power Supply
- Power Requirement
10~48 VDC
Kunder, der kiggede på dette produkt, kiggede også på