Gefen EXT-DVI-2-HDSDISP
Product is End of Life : 2020-11-23
DVI to HD-SDI PLUS Scaler Box
egenskaber
beskrivelse
yderligere information
lignende produkter
udskriv denne side
føj til notater
vis mine notater
egenskaber
beskrivelse
yderligere information
- 10-bit resolution for greater precision and dynamic range
- Proprietary 10-bit motion adaptive video de-interlacing with edge interpolation for HD / SD formats
- Advanced noise reduction and detail enhancement
- Max. active image size of 2048 samples x 2048 lines PBP processing for various combinations of video and graphics with alpha blending
- Fully integrated sprite based multi-plane OSD controller.
- Frame rate conversion to / from any refresh rate
- Pattern mode w/ color bars & cross-hatch patterns
- Color correction
- Noise Reduction
- Detail Enhancement
- Brightness Adjustment
- Gamma Selection
- Aspect Ratio Select
- Custom Timing output mode
- French/English Menu Set
- RS-232 upgradeable firmware
- RS-232 and/or IR Control
- Genlock
Enables Compatibility Among SDI and DVI Devices
Combines SDI and DVI Equipment for Maximum Interoperability
The DVI to HDSDI Scaler PLUS is the newest revision of our HDSDI conversion line incorporating Full Single Link DVI-D conversion scaled to your choice of SD/HDSDI Single or Dual link modes. Resolutions of up to 2048x1080/24 (single link) and 1080p/24 (dual link) are supported over the HDSDI link for those that want true "High Definition". Performance has been greatly enhanced with Gennum’s VXP Scaler onboard, allowing for new features such as Genlock, Color & Gamma Correction, Noise Reduction, Detail Enhancement, Aspect Ratio Selection, Pattern Generator Mode, & Multiple Language Menu Support. The Bottom Line? -- More performance, less cost.
How It Works
DVI devices are connected to the DVI input and SDI devices are connected to the SDI output. When the source, display and the Scaler are powered and connected, video signals are converted to the proper format.
Note: Please click here for the RS-232 remote control manual
Combines SDI and DVI Equipment for Maximum Interoperability
The DVI to HDSDI Scaler PLUS is the newest revision of our HDSDI conversion line incorporating Full Single Link DVI-D conversion scaled to your choice of SD/HDSDI Single or Dual link modes. Resolutions of up to 2048x1080/24 (single link) and 1080p/24 (dual link) are supported over the HDSDI link for those that want true "High Definition". Performance has been greatly enhanced with Gennum’s VXP Scaler onboard, allowing for new features such as Genlock, Color & Gamma Correction, Noise Reduction, Detail Enhancement, Aspect Ratio Selection, Pattern Generator Mode, & Multiple Language Menu Support. The Bottom Line? -- More performance, less cost.
How It Works
DVI devices are connected to the DVI input and SDI devices are connected to the SDI output. When the source, display and the Scaler are powered and connected, video signals are converted to the proper format.
Note: Please click here for the RS-232 remote control manual
Specifications
- Input Video Bandwidth: 165 MHz
- Output Video Bandwidth: 2 x 1.485 Gbps
- Maximum Input Resolution: 2048x1080 (2K)
- Maximum Output Resolution - Single Link: 2048x1080/24
- Maximum Output Resolution - Dual Link: 1080p/60
- DVI Connector: DVI-I 29 pin female (digital only)
- SDI/HDSDI Connector: BNC female
- Data Port: Serial RS-232
- Power Supply: 5V DC Locking Type
- Power Consumption: 20 watts (Max.)
- Dimensions: 8.25" W x 1.75" H x 7.5" D
- Shipping Weight: 4 lbs.
Kunder, der kiggede på dette produkt, kiggede også på