Advantech Conel BB-SR30318320-SWH
SmartMotion Twin Module Cellular Router
- Two Independent cellular modules for advanced fail over feature
- Powerful CPU and enhanced memory to support high demand customer applications
- Load Balancing
- Extended operational temperature range from -40 °C to +75 °C
- 10-60 VDC operated with transient and reverse polarity voltage protection
- GPS and GLONASS support
- Low power consumption mode for solar and battery power applications
- PoE PD, PoE PSE, In/Out, USB Host, MicroSD card holder
- Advanced security features
The SmartMotion TM cellular router provides a reliable, secure network, with failover protection for devices and LANs. Two interdependent cellular modules with 2 SIMs slots each to support multiple cellular carriers. Business continuity is never a problem with this advanced fail over architecture and Load Balancing feature which simultaneously receives Cellular, WiFi and Ethernet data.
SmartMotion TM automatic wireless failover protects against loss of communications in wired or wireless networks by using dual LTE/4G cellular module technology that accommodates multiple cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s and download speeds of up to 100 Mbit/s meeting the high demand required for video transfer.
The SmartMotion TM is designed and tested to meet the requirements of industrial, mobile, security and other harsh environ- ment application where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and advanced sleep mode feature to allow low power consumption for solar and battery power applications.
The SmartMotion TM places intelligence out at the network edge with an extremely powerful CPU and enhanced embedded memory capacity providing full support for LTE/4G (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartMotion TM from remote locations.
The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.
The flexible SmartMotion TM concept includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module).
The SmartMotion TM supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numer -ous other functions, as well as additional software like SmartWorx HUB, SmartCluster VPN Server and R-SeeNet.
SmartMotion TM automatic wireless failover protects against loss of communications in wired or wireless networks by using dual LTE/4G cellular module technology that accommodates multiple cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s and download speeds of up to 100 Mbit/s meeting the high demand required for video transfer.
The SmartMotion TM is designed and tested to meet the requirements of industrial, mobile, security and other harsh environ- ment application where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and advanced sleep mode feature to allow low power consumption for solar and battery power applications.
The SmartMotion TM places intelligence out at the network edge with an extremely powerful CPU and enhanced embedded memory capacity providing full support for LTE/4G (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartMotion TM from remote locations.
The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.
The flexible SmartMotion TM concept includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module).
The SmartMotion TM supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numer -ous other functions, as well as additional software like SmartWorx HUB, SmartCluster VPN Server and R-SeeNet.
TECHNICAL SPECIFICATION
Power, Consumption, Environmental, IP cover
- Power supply
10 – 60 VDC (2–Way Molex connector)
Power consumption – Idle / Average / Peak / Sleep Mode
2.5 W / 4W / 11 W / 10 mW
Temperature range – Operating / Storage
-40 to +75 °C / -40 to +85 °C
Temperature range LTE450 – Operating / Storage
-20 to +60 °C / -40 to +85 °C
Humidity – Operating / Storage (non condensing)
0 to 95 % / 0 to 95 %
Cold Start
-35 °C
Operating Altitude
2000 m / 70 kPa
Ingress Protection Rating
IP30
Cellular module parameters
ST352 (ST355) | ST355 – LTE450 module | |
LTE | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 8 compliant Supported frequencies: 800 / 900 / 1800 / 2100 / 2600 MHz | Bit rate 100 Mbps (DL) / 50 Mbps (UL) 3GPP release 9 compliant Supported frequencies: 450 / 800 / 1800 / 2600 MHz |
WCDMA | Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 900 / 2100 MHz | Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL) Supported frequencies: 900 / 2100 MHz |
GPRS/EDGE | Bit rate 237 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 900 / 1800 / 1900 MHz | Bit rate 236 kbps (DL) / 59.2 kbps (UL) Supported frequencies: 900 / 1800 MHz |
WiFi - 802.11 a/b/g/n, AP or Client modes
- Supported WiFi band
2.4 GHz, 5.4 GHz
Number of clients:
10
Encryption:
None, WEP, TKIP, AES
Authentication:
Open, Shared, WPA–PSK, WPA2–PSK
5 GHz supported channels
36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
2.4 GHz supported channels
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
INDUSTRIY CERTIFICATIONS & APPROVALS
- Radio for general LTE
ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1, ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13 v5.2.1
Radio for LTE450
ETSI EN 301 908-1 v6.2.1, ETSI EN 301 908-13 v6.2.1, ETSI EN 301 489-24 v1.5.1
Emissions/ Immunity
IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2, EN 55022:2010
Safety
EN 60950-1:06 ed.2 (not Hazardous Locations), EN 62311:2008
Vehicle
E8
Environmental
RoHS, RoHS2, REACH, WEEE
Mechanical
- Metal case with metal DIN rail
SIMs for secondary module are covered
Enclosure Dimensions
55x97x125 mm (150 mm including wall month sides)
Weight
420 g
Features
- Network and Routing
DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging
Security
HTTPS, SSH, VPN tunnels, SFTP
Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
VPN tunnelling
Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN
IPSec with IKEv1 and IKEv2
Configuration Firmware Management
Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server
Backup configuration, Restore configuration
Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS),
Over-the-Air software updates, Over-the-Air cellular module update from FW
Diagnostic
One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH
Status
Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days
Log
System Log, Reboot Log, Kernel Log
Controling and diagnostic
SMS, SNMP v1/v2c/v3, Statuses, Log
Event Engine
StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature.
Report Types: RAP, SMS, email, SNMP Trap, TCP (csv, xml, binary)
Other
Support of IPv6
Ports, LED, Antennas
- 2x ETH
RJ45, 10/100 Mbps, 1.5 kV RMS
SIM
4 Mini SIMs (2FF) (rear panel)
LED Indicators
PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT
5x ANT - 2x ANT, 2x DIV, GPS
SMA connectors
WiFi antenna - *optional
R-SMA connector
USB
USB Host connector 2.0
I/O
6-Way Molex connector - 2x binary input, 1x binary output
SD Card
1x Micro SD Card slot (rear panel)
RST
RESET button
Cellular module parameters
PoE Parameters | PoE PD | PoE PSE |
Input voltage range | 42.5 – 57 V | 44 – 57 V, 65 W |
Power available | 25.50 W | 2x 25.50 W (ETH0, ETH1) |
Maximum current | 600 mA | |
Insul. Strenght | 1.5 kV from the router | none |
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector.
Kunder, der kiggede på dette produkt, kiggede også på