Advantech Conel BB-RT3G-350
Cellular/Ethernet Network Gateway with 1 Ethernet port, wireless mesh 802.15.4e, 3G cellular, AC power adapter
- 802.15.4e SmartMesh IP radio
- 10/100 Ethernet network interface
- EV-DO/CDMA and HSPA+/GPRS/GSM cellular network interface
- Communicates with Wzzard Intelligent Edge Nodes
- Industrial design - wide operating range (-30 to +60 C)
- 10-30 VDC power
- Class 1/Division 2 Certified
The Spectre Network Gateway connects to the SmartMesh IP wireless mesh network and the Wzzard Intelligent Edge nodes through an integrated 802.15.4e radio. The Spectre Network Gateway receives the incoming data stream from edge nodes in MQTT-SN format and converts the information into MQTT protocol for transport to an MQTT broker on your network or on the Internet. The leading IoT applications providers include MQTT brokers in their solutions, and open source MQTT brokers are available for installation on private networks.
The Spectre Network Gateway is built for plug-and-play simplicity with extensive remote management, deployment and customization options. It connects Ethernet equipment and other devices to the Internet or intranet via either 3G cellular or 10/100 wired Ethernet. The standard configuration includes a 10/100 Ethernet port, USB host port, binary input/output (I/O) port and an 802.15.4e radio. It also has an auxiliary port that can be configured for other purposes, like Ethernet or RS-232/485/422.
The Spectre Network Gateway is built for plug-and-play simplicity with extensive remote management, deployment and customization options. It connects Ethernet equipment and other devices to the Internet or intranet via either 3G cellular or 10/100 wired Ethernet. The standard configuration includes a 10/100 Ethernet port, USB host port, binary input/output (I/O) port and an 802.15.4e radio. It also has an auxiliary port that can be configured for other purposes, like Ethernet or RS-232/485/422.
SPECIFICATIONS
INTERFACES
- Standard
- Ethernet
10/100 Mbps
USB
USB Type A host
Binary I/O
1 input / 1 output
SIM Card
1 SIM card port
802.15.4E radio
Expansion Port Options
- Ethernet 10/100 Mbps
RS-232
RS-422/485
ANTENNA:
- SMA – 50 Ohms
3G: 2 dBi, penta band, right angle dipole (2 included)
802.15.4e, 2.4 GHz, 5 dBi (1 included)
3G CELLULAR FREQUENCY BANDS
- Quad Band UMTS (WCDMA): 850, 900,1900 and 2100 MHz
Quad-Band GSM/GPRS/EDGE: 850, 900, 1800 and 1900 MHz
POWER
- Source
10 – 30 VDC
Consumption
2.3W receive mode
Up to 3.5 W (GPRS transmission)
Up to 5.5 W (UMTS/HSDPA transmission)
MECHANICAL
- Dimensions
1.7 x 3.0 x 4.5 in (42 x 80 x 113 mm), 35mm DIN rail
Enclosure
Metal
Weight
150 g
ENVIRONMENTAL
- Operating Temperature
-30 to +60°C
Storage Temperature
-40 to +85°C
FEATURES -- SMARTMESH IP RADIO -- 802.15.4E -- 2.4 GHZ
Parameter | Conditions | Min | Typ | Max | Units |
Frequency Band | 2400 | 2.4835 | GHz | ||
Number of Channels | 15 | MHz | |||
Channel Separation | 5 | ||||
Channel Clear Frequency | 2405 + 5*(k-11) | MHz | |||
Modulation | IEEE 802.15.4 Direct Sequence Spread Spectrum (DSSS) | ||||
Raw Data Rate | 250 | kbps | |||
Range | 25 °C, 50% RH, +2dBi Omni-Directional Antenna, Antenna 2 m | m | |||
Indoor | 100 | m | |||
Outdoor | 300 | m | |||
Free Space | 1200 | m | |||
Receiver Sensitivity | Packet Data Error Rate (PER) = 1% | -93 | dBm | ||
Receiver Sensitivity | PER = 50% | -95 | dBm | ||
Output Power -- Delivered to a 50 Ù load | |||||
High Calibration Setting | 8 | dBm | |||
Low Calibration Setting | 0 | dBm |
NETWORKING AND SECURITY
- DHCP – automatic IP addressing in LAN network
NAT – IP address and ports translation between inside/outside network
Firewall – filtering of addresses, ports, protocols
VRRP – virtual backup router function
DynDNS client – access to the router with a dynamic IP address
QoS – quality of service
Dial-in – Communicate via CSD call
PPPoE Bridge – PPP frames encapsulation inside ETH frames
IPsec, OpenVPN, L2TP – secure encrypted tunnels
GRE tunnel – simple tunnel without security measures
CONFIGURATION AND DIAGNOSTICS
- HTTP server – configuration via web server
Telnet – configuration and access to the file system
SNMP – router diagnostics, communication with I/O and M-Bus
Cellular state signalization by LED
On-line info on cellular signal status (level, cell, neighbors)
SMS info – power on, cellular connection or disconnection
SMS control – on/off cellular connection, switch SIM, I/O, etc.
Transferred data counting, one more APN as backup
Remote router group configuration change, switching among configuration profiles
SSH – encrypted configuration and access to the file system
APPROVALS / CERTIFICATIONS
- FCC Part 15, CE
Class 1/Division 2
Certifications
AT&T, Verizon, PTCRB (Contact B&B Electronics for the latest approvals.)
CE
EN 301 511, v9.0.2
EN 301 908-1&2, v3.2.1
ETSI EN 301 489-1 V1.8.1
EN 60950-1:06 ed.2 + A11:09 + A1:10
Emission
EN 55022/B
Immunity
ETS 300 342 immunity
Safety
EN 60950
Isolation
EN 60747 isolation
Ordering Information | |
SPECTRE NETWORK GATEWAY MODEL NUMBERS | |
ERT351 | Ethernet Network Gateway with 2 Ethernet ports, wireless mesh 802.15.4e, AC power adapter |
RT3G-350 | Cellular/Ethernet Network Gateway with 1 Ethernet port, wireless mesh 802.15.4e, 3G cellular, AC power adapter |
RT3G-351 | Cellular/Ethernet Network Gateway with 2 Ethernet ports, wireless mesh 802.15.4e, 3G cellular, AC power adapter |
RT3G-352 | Cellular/Ethernet Network Gateway with 1 Ethernet port, 1 RS-232 port, wireless mesh 802.15.4e, 3G cellular, AC power adapter |
RT3G-354 | Cellular/Ethernet Network Gateway with 1 Ethernet port, 1 RS-485 port, wireless mesh 802.15.4e, 3G cellular, AC power adapter |
ACCESSORIES | |
MDR-20-24 | 24VDC, 20W, 1A Power Supply |
C5UMB3FBG | Category 5E Cable, UTP, 1 m (3 ft), Beige |
C5UMB10FBL | Category 5E Cable, UTP, 3 m (10 ft), Blue |
TRAB806/17103P | Cellular Antenna, Multi-Band, Low Profile |
RT3G-ANT001 | 3G Cellular Antenna, Penta-Band, Right-Angle SMA |
RT3G-ANT002 | 3G Cellular Antenna, Penta-Band, Magnetic Mount SMA |
Kunder, der kiggede på dette produkt, kiggede også på