Gefen GEF-SDI-AUDD
Product is End of Life : 2020-02-18
3GSDI Audio De-Embedder
- Supported Standards:
- SDSDI(SMPTE 259M)
- EDSDI(SMPTE 344M)
- HDSDI(SMPTE 292M)
- Dual-Link HDSDI(SMPTE 372M)
- 3GSDI(SMPTE 424M)
- Supported Resolutions:
- 525i / 720p / 1080i @ 59.94Hz
- 1080p @ 23.98Hz
- 625i / 720p / 1080i @ 50Hz
- 1080p @ 24Hz
- 1080i / 720p @ 60Hz
- 1080p @ 60Hz
- 2K
- Allows individual digital audio channels to be re-arranged on the output
- Audio delay adjustment for each pair of audio outputs (0 - 150 ms)
- 3GSDI detection
- LED Status Indicators
- Standby Mode
- RS-232 Control for automation
- USB port for upgrading firmware
- Rack mountable (rack ears included)
- Internal power supply with detachable IEC AC cord
- Back panel master power switch
Audio DeEmbedder for 3GSDI stream removes and routes audio data from any SDI source to any four AES/EBU audio outputs
The GefenPRO 3GSDI Audio De-Embedder extracts audio from 3GSDI, Single-Link HDSDI, EDSDI, and SDI video signals. Up to four AES/EBU digital audio streams can be de-embedded and routed to any of the four audio outputs. Selection and routing of each audio group or pair can be configured via RS-232.
How It Works
Connect an SDI source to the SDI In connector. Connect the SDI Loop Out connector to an SDI audio/video device to monitor the original unmodified signal. Connect the Output connector to an SDI acceptor (such as video broadcastequipment). Connect up to four AES/EBU digital audio reproduction devices (such as a DAT recorder or pre-amp) to the Audio Out connectors. Connect the RS-232 cable from the Audio De-Embedder to a PC or automation system to control which audio group or pair will be de-embedded from the video signal. Connect the AC power cord to the 3GSDI Audio De-Embedder and to an available electrical outlet. Once the unit is powered, RS-232 commands can be used to select the audio group and pair to be de-embedded from the video signal.
GefenPRO Advantage
GefenPRO supports demanding professionals with invaluable equipment for commercial and broadcast environments. With its expanded hardware, internal power supplies, robust rack mountable enclosures, and 2 year warranty with 24/7 customer support, the GefenPRO Modular Matrix will always perform in the most technically challenging environments.
The GefenPRO 3GSDI Audio De-Embedder extracts audio from 3GSDI, Single-Link HDSDI, EDSDI, and SDI video signals. Up to four AES/EBU digital audio streams can be de-embedded and routed to any of the four audio outputs. Selection and routing of each audio group or pair can be configured via RS-232.
How It Works
Connect an SDI source to the SDI In connector. Connect the SDI Loop Out connector to an SDI audio/video device to monitor the original unmodified signal. Connect the Output connector to an SDI acceptor (such as video broadcastequipment). Connect up to four AES/EBU digital audio reproduction devices (such as a DAT recorder or pre-amp) to the Audio Out connectors. Connect the RS-232 cable from the Audio De-Embedder to a PC or automation system to control which audio group or pair will be de-embedded from the video signal. Connect the AC power cord to the 3GSDI Audio De-Embedder and to an available electrical outlet. Once the unit is powered, RS-232 commands can be used to select the audio group and pair to be de-embedded from the video signal.
GefenPRO Advantage
GefenPRO supports demanding professionals with invaluable equipment for commercial and broadcast environments. With its expanded hardware, internal power supplies, robust rack mountable enclosures, and 2 year warranty with 24/7 customer support, the GefenPRO Modular Matrix will always perform in the most technically challenging environments.
Specifications
- Supported formats:
- SDI (SMPTE 259M)
- EDSDI (SMPTE 344M)
- Single-Link HDSDI (SMPTE 292M)
- 3GSDI (SMPTE 424M)
- SDI Input Connector: (1) BNC, female
- SDI Loop Out Connector: (1) BNC, female
- SDI Output Connector: (1) BNC, female
- Digital Audio Output Connectors: (4) BNC, female
- RS-232 Connector: (1) DB-9, female
- Power On Indicator: (1) LED, blue
- 3G-SDI Indicator: (1) LED, blue
- Audio De-embedder Indicator: (1) LED, blue
- SDI/HD-SDI Signal Indicator: (1) LED, bi-color (red/green)
- AC Power Connector: (1) IEC type
- Power Supply: 100 - 240V AC (Internal)
- Dimensions (W x H x D): 16.8" x 1.75" x 7" (428mm x 44.5mm x 178mm)
- Shipping Weight: 6 lbs (2.72 kg)
Kunder, der kiggede på dette produkt, kiggede også på