Gefen EXT-HDMI1.3-CAT6-4X

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Video Extender > Gefen EXT-HDMI1.3-CAT6-4X

Gefen EXT-HDMI1.3-CAT6-4X

Product is End of Life : 2020-02-17
4x CAT6 Extender for HDMI

Gefen EXT-HDMI1.3-CAT6-4X
3417_27789.jpg
3417_5161.jpg
3417_5162.jpg
3417_5163.jpg
3417_5164.jpg
3417_5165.jpg
3417_5166.gif
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • Extends four HDMI sources up to 200 feet (60 meters) using one CAT-6A cable per display
  • Supports resolutions up to 1080p Full HD and 1920 X 1200
  • Supports LPCM 7.1 Audio, Dolby Digital Plus, Dolby TrueHD and DTS Master Audio
  • RS-232 serial port extension for automation and matrix control from any receiver location
  • IR extension and matrix control from any receiver
  • Adds IP Control for the connected matrix
  • May also be used to replace four stand-alone HDMI extenders
  • HDCP Compliant
  • 3DTV, Lip Sync and CEC Pass-through
  • Rack-mountable (Sender Only)
Four Times CAT6 Extender for HDMI - Companion Product for Matrixes

The Gefen 4x CAT6 Extender for HDMI is a companion product for any Gefen 4X4 HDMI matrix. It takes HDMI sources routed by the matrix and extends them up to 200 feet (60 meters) to as many as four HDTV displays. Control and convenience features include control via IP, RS-232 and IR, as well as IR relay for control of source components.

The Gefen 4x CAT6 Extender for HDMI supports all HDMI 1.3 features including Deep Color, Lip Sync, 3DTV and lossless audio formats such as Dolby TrueHD and DTS Master Audio. The 4x CAT6 Extender’s pure digital transmission technology ensures 100% signal integrity up to 200 feet (60 meters) over a single CAT-6A cable.


How It Works

The Gefen 4x CAT6 Extender for HDMI system consists of one Sender unit and four Receiver units. Up to four HDMI sources can be connected to the Sender unit with the included one foot HDMI cables. A single CAT-6A cable of up to 200 feet (60 meters) connects the Sender and Receiver units. Each Receiver unit is connected by a HDMI cable to a HDTV Display. The Sender is powered using a 24V DC power supply and each Receiver is powered by its own 5V DC power supply.

The product can be used as an add-on HDMI extender for any Gefen 4X4 HDMI Matrix, or as a stand-alone extender for extending HDMI signals up to 200 feet (60 meters) to as many as four HDTV displays. Both configurations allow for IR signals to be relayed from the display location back to the source components over the single CAT-6A cable.

An optional IR remote control can be used at the Sender to control the routing or at each Receiver to control each individual zone. Additional control is possible via any HTTP-Compliant Web Browser (IP Control) or by using RS232 control. The Sender unit also has a unique feature that can apply control to the IP control and RS232 control of the 4x4 HDMI 1.3 Matrixes: simply connect the supplied RS232 cable to the Matrix’s RS232 input and the 4x CAT6 Extender for the HDMI Sender unit’s RS232 output.



Note: HDMI 1.3 Features Supported:
  • Dolby TrueHD & DTS-HD Master Audio
  • Deep Color Supported (x.v.Color)
  • 225 MHz (up to 12 bit YUV 444 @ 1080p)
  • Lip-Sync Pass-Through
  • 3DTV

This product is an HDCP pass-through device.
ProdGrafik
Specifications
  • Maximum Pixel Clock: 225 MHz
  • Video Input Connectors (Sender): (4) HDMI Type A 19-pin female
  • Video Output Connector (Each Receiver): (1) HDMI Type A 19-pin female
  • Link Connectors (Sender/Receiver): (4) RJ-45, Shielded
  • Link Connectors (Each Receiver): (1) RJ-45, Shielded
  • RS-232 Port (Sender): (1) DB-9, male (to connect to Matrix)
  • RS-232 Port (Sender/Each Receiver): (1) DB-9, female
  • Ethernet Port (Sender): (1) RJ-45, Shielded
  • IR Extender Port (Sender/Receiver): (1) 3.5mm mini-stereo jack
  • IR Emitter Ports (Sender): (4) 3.5mm mini-mono jacks
  • Power Supply: 24V DC (Sender), 5V DC (Receiver)
  • Power Consumption: 60W max. (Sender), 10W max. (Each Receiver)
  • Sender Dimensions: 17.0" W x 4.5" D x 1.7" H (1U rack height with supplied rack ears)
  • Receiver Dimensions: 7.5" W x 3.5" D x 1.3" H
  • Shipping Weight: 15 lbs.
Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.